The eMeter connects wirelessly to remote Wippy. It measures the electricity consumed throughout the home also of equipment not linked to the control units. It is positioned to the nearest electrical panel where the Enel (or other European) meter is far (outside the apartment, the store, etc..) and therefore it is not possible to use the eMonitor. It reads power and electricity consumed as counted by the counter, the device transmits it wirelessly to the remote Wippy that displays it in real time. Option of remote control charts measures up to two years ago displayed on Wippy.

General Characteristics	Chip Ember EM250 Compatible IEEE 802.15.4 Stack EmberZnet 3.5.x (ZigBee PRO) Modbus/RTU Device address settable via radio commands
RF Characteristics	Frequency: 2405 MHz ÷ 2480 MHz Modulation: DSSS Nominal transmission power: 2mW (3 dBm) Receiver sensitivity: -95 dBm Internal antenna gain: 0 dB Range outdoor/indoor: 100m/30m
Supply	90/250 Vac; 1W; 50/60Hz
Measurement	Active Power [W] Energy consumption [Wh] Energy consumption measurement time [second] Working conditions: 230V-70A max.
Digital Outputs	For auxiliary relay 230 Vac, 40mA max
Connections	Terminal blocks (5,08 mm pitch)
CT	70A max.
Environment Parameters	Operating temperature: -10 ÷ +60°C; <80% U.R. not condensing Storage temperature: -20 ÷ +70°C; <80% U.R. not condensing
Compliant with 2006/95/EEC, 89/336/EEC, 99/5/EEC directives Reference Norms:	ETSI EN 300 328: Radio Compatibility for digitals wide band transmissions ETSI EN 301 489: Radio Compatibility EN 55014-1:2006 + A 1:2009: Electromagnetic Compatibility - Immunity EN 61000-3-2:2006: Electromagnetic Compatibility - Emissions EN 61000-3-3:2008: Electromagnetic Compatibility - Emissions EN 55014-2: Electromagnetic Compatibility - Immunity